Using your Telli Health Blood Pressure Cuff with Brook

Want to silence the audio on your cuff?

Hit SETSETMEM → START/STOP

Step 1

Select the cuff that comfortably wraps around your upper arm, with room for two fingers between the cuff and your arm.


Step 1

Select the cuff that comfortably wraps around your upper arm, with room for two fingers between the cuff and your arm.


Step 2

Add the batteries into the back of your device. Plug the cuff tube connector into the side of the device.

Step 2

Add the batteries into the back of your device. Plug the cuff tube connector into the side of the device.

Step 3

Slide cuff onto your bare upper arm, with tube exiting towards your hand on the inside of your elbow. 

Step 3

Slide cuff onto your bare upper arm, with tube exiting towards your hand on the inside of your elbow. 

Step 3

Slide cuff onto your bare upper arm, with tube exiting towards your hand on the inside of your elbow. 

Step 4

Wrap cuff over your arm and secure in place. Lower edge of cuff should lie 1 inch above your elbow. Don’t over tighten.

Step 4

Wrap cuff over your arm and secure in place. Lower edge of cuff should lie 1 inch above your elbow. Don’t over tighten.

Step 4

Wrap cuff over your arm and secure in place. Lower edge of cuff should lie 1 inch above your elbow. Don’t over tighten.

Step 5

Lay your arm on a table, palm upwards, so cuff is at the same height as your heart. Don’t bend tube.

Step 5

Lay your arm on a table, palm upwards, so cuff is at the same height as your heart. Don’t bend tube.

Step 5

Lay your arm on a table, palm upwards, so cuff is at the same height as your heart. Don’t bend tube.

Step 6

Sit silently with your legs uncrossed and flat on the ground. Press START/STOP to turn on the device and start a reading.

Step 6

Sit silently with your legs uncrossed and flat on the ground. Press START/STOP to turn on the device and start a reading.

Step 6

Sit silently with your legs uncrossed and flat on the ground. Press START/STOP to turn on the device and start a reading.

Step 7

The device automatically transmits your results. If data upload fails, the upper right of the LCD screen will show “Err.”

Step 7

The device automatically transmits your results. If data upload fails, the upper right of the LCD screen will show “Err.”

Step 7

The device automatically transmits your results. If data upload fails, the upper right of the LCD screen will show “Err.”

Step 8

Open your Brook app, tap Profile, then scroll to the blood pressure icon to display your data.

Don’t see your reading within 15 minutes? Call (800) 266-4407 for troubleshooting.

Step 8

Open your Brook app, tap Profile, then scroll to the blood pressure icon to display your data.

Don’t see your reading within 15 minutes? Call (800) 266-4407 for troubleshooting.

Step 8

Open your Brook app, tap Profile, then scroll to the blood pressure icon to display your data.

Don’t see your reading within 15 minutes? Call (800) 266-4407 for troubleshooting.

Want to download these steps as a PDF so you can print it at home? Click here.

Brook Inc

113 Cherry St
PMB 30466
Seattle, Washington 98104

Connect with Brook
Brook Inc

113 Cherry St
PMB 30466
Seattle, Washington 98104

Connect with Brook